Service Broker Advanced Basics Workbench

SQL Service Broker, an asynchronous queuing and messaging system for SQL Server 2005, is set to change the way we design and run distributed applications. Adam Machanic once more makes it all seem so easy in Part 2 of his epic series...

This is the second of three Workshops on Service Broker. Simple-Talk’s Workbench series are intended to be loaded into SQL Servers Management Studio, read and executed. They are intended to catapault the reader into familiarity with the subject by trying things out. Experiment and generally use them as a starting-off point with an aspect of SQL Server. The actual source code is in a downloadable file at the bottom of the article.

Contents

SSB Workbench Part 2: Advanced Basics

In the first part of this workbench series, we covered the foundations: Setting up message types, contracts, queues, and services, and sending and waiting for messages. This second part extends on the first. We’ll get in to some of the catalog views that you can query to find out what Service Broker is up to, investigate how Service Broker handles transactions and locking, route our messages across databases, and process messages automatically with stored procedures.

Once you’ve finished with this second workbench, you will have a complete understanding of all of the most common SSB features that you will use on projects again and again. The few remaining interesting features will be covered in the third installment of this mega-workbench, coming soon to a Simple-Talk near you…

So with that, let’s jump in!

Setup

Get a few basics in place: A message type without validation (meaning that we can send any binary data), a contract based on the message type, a couple of queues, and a couple of services. See the last workbench for details on all of this.

The Conversation Endpoints View

The sys.conversation_endpoints view is the primary catalog view that you can use to get information about which conversations exist in the current database, and their current status. The view provides quite a bit of information about each conversation, and we can use it to gain some insights into the internals of Service Broker.

Since we have, presumably, just created the database, querying the view at this point should return an empty set of rows:

Although there are almost 30 columns exposed by the view, for the sake of this workbench we’ll consider only a few:

conversation_handle
Conversation (or dialog) handles were discussed in detail in the previous workbench. This column is effectively the primary key for the view. The view will have one row for each handle generated, whether by an initiator or a target.
conversation_id
Each dialog has both an initiator and a target, with different dialog handles. This column is a GUID which relates rows for initiators with the rows for their targets.
is_iniator
This is a bit column that will return 1 if the initiating handle was the one represented in the conversation_handle column, or 0 otherwise.
conversation_group_id
Conversation groups and this column will be discussed in detail shortly.
state_desc
Any given side of a dialog, at any given time, can be in any of several states. These include “CONVERSING”, which means that the conversation is open for messages, or one of two “DISCONNECTED” states that indicate that one or both parties have called END COVERSATION.
far_service and far_broker_instance
Both of these columns will be discussed when we get into routing.

To look at some of the data exposed by the view, we’ll first have to start a conversation.

Now that a conversation has been initiated, the following query should return one row:

Running this query, we see that for the one row returned, is_initiator is set to 1 – which makes sense, given that we have just initiated a conversation. But why was only one row returned? If you’re following along, you might recall that a dialog has two sides: an initiator and a target. And each of these sides gets their own conversation handle. Furthermore, you might recall that I just mentioned that the conversation handle is effectively the primary key for the Conversation Endpoints view. So wouldn’t two rows make more sense?

The value of the state_desc column should give you a hint. It will read “STARTED_OUTBOUND”. Initiating a dialog, as it turns out, only starts up the initiator’s end of things. The target’s side of the conversation doesn’t actually exist until a message joins the fray and there is something for a target to receive…

Now we see both the initiator and the target, and for both rows the state_desc column’s value is “CONVERSING”. The conversation has started and all is well. Note the conversation_id column – its value is the same for both the initiator and the target. Should you ever need to find the target’s conversation handle based on the initiator handle, or the other way around, this column is key.

Now that we’ve seen how a conversation starts, let’s take a peek at what happens when it ends.

After running the preceding batch, you’ll notice that the target’s side of the conversation is now “CLOSED”. The initiator, on the other hand, has now gone into the “DISCONNECTED_INBOUND” state. As mentioned in the previous workbench, a disconnected side of a conversation can only retrieve any remaining messages and then end the conversation itself. So let’s do that.

Now you might notice something interesting and wholly unexpected. The initiator’s side of the conversation is gone, no longer showing up in the result set for the view. But the target is still there, and still closed.

As it turns out, the target will sit there in a closed state for “about half an hour,” according to Roger Wolter, the architect behind Service Broker. This is a security precaution, he says in his chapter of “Inside Microsoft SQL Server 2005: T-SQL Programming,” in order to prevent replay attacks.

That topic is quite beyond the scope of this workbench, but it’s important that you know that the target side does stay around for a while even after the conversation has been closed. We’ll discuss why that’s so important in the next workbench, so stay tuned…

Conversation Groups

As we’ve now observed several times throughout the course of the two workbenches, each time a dialog is started a conversation handle is automatically generated by Service Broker. But what you may not have noticed is that in addition to the conversation handle, there is also a second automatically generated GUID, the conversation group ID:

The first thing that makes this GUID different than the conversation handle is that it doesn’t have to be auto-generated. You can tell Service Broker which ID to use:

Running this, you’ll see that the instantly-identifiable GUID I’ve created is used as the conversation_group_id. But that’s just the initiator end of the conversation. What about the target?

Running the preceding batch, you’ll see that the target conversation is not enlisted in the same group as the initiator. Given the decoupled nature of initiators and targets we’ve already seen in the world of Service Broker, this should come as no huge shock, but there are some other reasons to keep these separate that I will show you in the section on locking and blocking.

Taking a Better Look at RECEIVE

To see the basic utility of conversation groups, we’ll first have to take a step back and look at the RECEIVE statement in a bit more depth than in the last workbench. Last time, we saw RECEIVE in its barest form – the statement itself and a column list. The optional WHERE clause allows you to filter based on a given conversation handle or conversation group ID.

The following batch first uses RECEIVE with a conversation handle, then sends a message back to the initiator, where it is received based on the conversation group ID.

Now that we’ve seen the power of the RECEIVE statement’s WHERE clause, it should be easy to see how it can be put to good use in conjunction with a conversation group ID. Suppose that for a certain task, you want to start several distinct dialogs, but get back all of the responses using a single RECEIVE statement. Since RECEIVE‘s WHERE clause only supports the equality predicate, you can’t ask for multiple conversations at once. You can instead group all of the conversations using a single conversation group, and use that to get all of the responses.

This same pattern gets even more powerful if you’re creating multiple dialogs across more than one service or queue. To see what that looks like, we’ll create a second target queue and a corresponding service:

Dialogs can now be started between the initiator and both queues, using the same conversation group id:

Looking at the output of the query from the Conversation Endpoints view, you’ll see that I’ve added a new column into the mix: far_service. This column tells us what service the dialog is targeting, and you should see two dialogs, each conversing to different services but both on the same conversation group.

Each of the targets can receive messages as usual, and send them back to the initiator:

The initiator can now receive both messages that we’ve sent back, using only the conversation group ID – despite the fact that the messages are on different conversations.

Conversation Group Locking

We’ve now seen the power of conversation groups as a means by which to introduce some logical organization to sets of conversations. But conversation groups play a much bigger role in the overall Service Broker infrastructure.

Since the Service Broker is a database engine technology and supports all of the same ACID rules as any other data in your database, it should come as no surprise to hear that it uses locking (and, as a consequence, blocking) to achieve isolation. One might, at first glance, assume that the granularity of the locks will be at the conversation or dialog level. But the designers of Service Broker realized that some processes are much more distributed than a single conversation – so locking instead occurs at the granularity of conversation groups.

If you’ve been following along and running the examples, you should have two conversing dialogs at this point, each with an initiator on the same conversation group. We can use these dialogs to examine the ins and outs of conversation group locking.

First we’ll send a message from the Target2 service to the initiator:

To show the effects of locking, open a new SSMS window, begin a transaction and do a RECEIVE for the conversation group:

Back in this window, let’s try sending a message to the Target service:

As you can see, we’re blocked, even though we’re sending a message on a different conversation than the one that we’ve received a message on. The net effect is that the entire group represents a single transactional unit – a powerful concept, if you need to do several subtasks as part of some bigger piece of work.

But now for the cool part. The conversation group that we’re working with is locked, but remember that a dialog has two sides, each of which operates under its own conversation group. This means that even when one side is locked, the other side is free to continue working, and even free to continue sending messages:

We’ve now sent a message. Let’s take a peek and see if it showed up:

Running the preceding query should return one row, for the message that we just sent. The NOLOCK hint is necessary, in order to get around the locked messages, still held by the transaction in the other window.

What do you think will happen if we try to do a second RECEIVE outside the scope of the transaction?

If you’ve just run the preceding query, you might be surprised by the results. We have a message in the queue for the specified conversation group, and the conversation group is locked by the transaction, so shouldn’t we see some blocking rather than an empty result set?

To help explain this phenomenon, initiate a new conversation, from the Target service to the Init service, and send a message:

Now there are two messages in the queue, each belonging to different conversation groups. What will be the result, then, of a RECEIVE with no WHERE clause?

This RECEIVE is not blocked – and that’s a good thing, because we want multiple readers to be able to work with the queue simultaneously. What Service Broker actually does internally as part of the RECEIVE, is use the equivalent of a READPAST hint. The locked conversation groups are skipped, thereby greatly increasing concurrency.

There is one other side-effect of the way Service Broker handles conversation group locking. To prepare, first go back to the other window and commit the transaction:

Now start another dialog and send a message to the Init queue:

We once again have two messages in the queue, both on separate conversation groups. But this time the NOLOCK hint wasn’t needed for the SELECT – no transactions are active and neither of the conversation groups are locked.

So once again we pose an all-important question: In this situation, how should a RECEIVE with no WHERE clause behave?

Running the RECEIVE, you’ll see that only a single message is returned. This doesn’t mean that RECEIVE can’t return multiple messages at a time – it can, and as shown in the previous workbench it supports the TOP clause. What we’re actually seeing in this case is RECEIVE only returning messages from a single conversation group at a time.

Yet again, this is an effort by the Service Broker team to promote high concurrency. If you have a farm of workers, each pulling tasks off of a central Service Broker queue, this single group at a time behavior ensures that each worker takes at most a single task, and at the same time the READPAST guarantees that workers don’t block each other. The result is a high performance and highly concurrent queuing system – exactly what we want from something like Service Broker.

In the next installment of this workbench I’ll discuss worker farms and considerations for read performance in quite a bit more depth. Until then, you should now have a good feeling for how Service Broker handles locking and blocking.

Message Activation

We are programmers, and a prerequisite for being a programmer is being an incredibly lazy person. The whole point of computer programming is to spend a bit of time upfront to make a machine do all of the repetitive tasks while we sit back and watch. Programming is a fantastic career for those of us who prefer surfing the Web to sitting around waiting for data to come in for us to process. We let the computers do this grunt work. Yet we haven’t really let the computer do anything with Service Broker yet. We have run all of the RECEIVE statements ourselves – seriously cutting into our surfing habit.

Luckily, the creators of Service Broker are also programmers, and they understand that we need time to ourselves. The answer to this burning need for freedom is Service Broker’s message activation feature. Turning on message activation for a queue tells Service Broker to sit and quietly wait for a message to arrive. When – and only when – a message shows up, Service Broker suddenly comes alive, running whatever stored procedure you’ve told it to start up in the event that a message does appear.

Message activation is nothing difficult to understand now that we’ve gone through most of the Service Broker infrastructure in detail. A properly written activation stored procedure uses the same RECEIVE logic and statements we’ve already covered. The only difference, as you’ll see, is that an activation procedure generally wraps these constructs in a loop in order to make things a bit more efficient.

To demonstrate activation, our procedure needs to actually do something that we can observe once it has taken place. So to start with, create the following table, which we’ll insert some rows into asynchronously:

Once the table has been created, we can put our very first activation procedure into place. This procedure is nothing more than a slightly-modified version of the code from the “Ending the Conversation, Part 2” section of the first part of this workbench, wrapped in a stored procedure.

This stored procedure loops over all of the messages in the BLOB_Service_Target queue, inserting the bodies into the TestActivation table. It also follows all of the rules of being a good Service Broker consumer; if it gets an EndDialog message, it ends its own side of the conversation. And if it receives a a message it doesn’t know how to deal with, it gracefully handles the situation.

Since there is still a message sitting on the queue from a previous run, you can test the procedure now, before actually enabling it for activation.

Actually using the procedure as an activation service is a simple matter of using ALTER QUEUE and telling Service Broker about the module:

Few notes on the options I’ve used:

STATUS = ON is simple enough. Setting STATUS to ON enables activation for the queue, meaning that as soon as a message arrives the activation procedure will be fired.

The PROCEDURE_NAME is, of course, the name of the activation procedure.

And EXECUTE AS OWNER tells Service Broker to call the activation stored procedure using the credentials of whatever principal owns it – in this case, presumably your user.

I haven’t forgotten about MAX_QUEUE_READERS, but rather saved it; we’ll get to it in just a moment, but first let’s test activation by sending a message and seeing whether it arrives in the table.

If you’ve just run the preceding batch, you might notice that no rows were returned by the query. Is activation broken? The answer, if you’ve been running all of the code to this point, is of course no. The reason that no rows were returned is that activation is an asynchronous process, kicked off by a queue monitor thread that only checks for new messages every few seconds. Therefore, after a message is sent, you shouldn’t expect the stored procedure to instantly kick in – it might take a second or two before the queue monitor passes by and starts things up.

Running the SELECT again, you should now see the expected row:

As an aside, if activation still wasn’t working in a real system, you might want to check the Service Queues catalog view, which includes columns to help you determine whether activation is enabled, and which stored procedure has been configured for activation.

Back to the main task at hand: At this point we’ve handled a single message with a single queue reader. Now it’s time to talk about multiple readers, as specified by the MAX_QUEUE_READERS option.

This is the feature that makes activation much more than just a simple background process. Sure, we can do one message, but what about when multiple messages show up? With MAX_QUEUE_READERS set to 1, Service Broker will only start up one instance of the procedure at a time. And this is fine for us, since our procedure has a loop; it can handle multiple messages after being called just once. But what if its processing duties are slow, and it’s not clearing the queue fast enough? This is when a higher MAX_QUEUE_READERS value starts to look interesting.

If MAX_QUEUE_READERS is set to a value above 1, the same queue monitor that started activation to begin with will eventually kick off more instances of the stored procedure. This will keep going until either the queue empties, or the number of running instances hits the maximum specified by the option.

To see this in action, a WAITFOR DELAY can be inserted into the a test stored procedure to slow it down and keep the queue from clearing too quickly. To keep things simple, I am trimming off all of the “best practice” code involving ending conversations and dealing with unknown message types.

To test activation timing and get a feel for how it works, we’ll first disable activation on the queue, then send 2500 messages to prime the pump.

To monitor the activation, we will use the Broker Activated Tasks view. The following query should return a count of 0, since activation is currently disabled on the queue:

The next batch will turn activation back on for the queue, with a specified maximum number of activation procedures set to 10. It will then start looping until the first activation procedure kicks in. After that it will report on the number of active activation procedures once every two seconds, until they’re all gone (meaning that the queue is empty). After starting the batch, you should switch to the Messages pane in SSMS unless you have Results to Text mode enabled. Note that this batch takes around one minute to run on my notebook. Your timing may vary!

By now you should have a feeling for the basics of how activation behaves, but it’s important to stress that you need to think beyond just getting messages through the queue. We must consider activation in the context of the entire server. Should you set the maximum number of readers to a huge enough number to keep the queue mostly clear all the time? While that would certainly make your services return more quickly, it would also add a large amount of stress to the server. One of the reasons that queues are handy is that they can let work back up if it can’t be handled right away. When working with Service Broker, make sure to consider all aspects of the system, not just maximization of the one piece you’re focusing on.

The activation procedures shown here could be made a bit better. I’ve left out two key parts of the generally accepted activation procedure pattern: Use of WAITFOR on the receive and use of a transaction.

To see the utility of WAITFOR(RECEIVE), consider what happened at the end of the test run in the last batch. The moment there were no messages left to process, all of the activation procedures immediately stopped running. What if another batch of messages arrived just afterward? All of the procedures would have to spin back up, and the newly arrived messages would not be handled as quickly as the final messages that were on the queue at the end of the test. By using WAITFOR(RECEIVE) with a small timeout – say, a few seconds – we can make sure that the stored procedures stick around once the work is done, in case more should arrive.

Another issue is use of a transaction. What if a hardware error occurs between receiving the message from the queue and processing it? The message would be lost – unless we wrap the entire thing in a transaction.

An updated version of the InsertTestActivation stored procedure follows. This version uses a transaction in conjunction with the XACT_ABORT setting, to make sure that a rollback will occur in the event of any error. The procedure also uses WAITFOR(RECEIVE), with a timeout of five seconds.

Note that one consequence of transactions is what happens when a certain message keeps causing a rollback. I won’t get into the details here; search Books Online for “poison message handling” for more information.

Routing and Cross-Database Messaging

We’ve now covered just about every aspect of same-database conversations that you’ll commonly need to be concerned with when you work with Service Broker. But we need to remember that SSB is more than just a queuing system – it’s also a messaging infrastructure.

Same-database messaging certainly has its utility, but when we usually talk about messaging we think about communication between remote parties. For the sake of this workbench I won’t ask you to set up a separate server – our remote parties will be two databases in the same instance – but the concepts and all of the code I’ll show you will be the same if you choose to extend the example across multiple servers or even multiple data centers.

Routing is a complex topic, and I’ll just cover the basics here. What you need to know is that whenever you specify a target service when creating a message, you are not limited to a service in the local database; you can tell Service Broker about remote services in other databases or on other instances, using the CREATE ROUTE DDL statement. These routes are exposed via a catalog view called sys.routes:

Running the above query, you should see only one route, which is automatically created for the local database. But what if we want to send a message to another database? Let’s create one and find out what happens:

A final step is required because we’ll be talking to a remote database: permissions to set who can send messages to the service. For simplicity we’ll set it to [Public] (everyone); in your real applications you should configure this to something more realistic based on your security requirements.

Back in the SSB2 database, try sending a message to the remote queue and see if it shows up:

Once the message is sent, query the remote queue.

You should now see an empty result set. Where did the message go?

The primary tool used when debugging routing issues is the Transmission Queue, a catalog view that we can interrogate to see messages that weren’t successfully sent. The following query should return one row, for the message that we know has just failed.

If a message ends up in the transmission queue, it’s usually not dead. Service Broker will retry the send periodically, waiting up to a minute between each try. This means that once you fix the problem, the messages sitting in the transmission queue will eventually make it to their destination.

The problem in this situation is that Service Broker cannot cross database boundaries without a route, if the database is not set for TRUSTWORTHY mode. That’s a good thing – it helps ensure security – so let’s take the high road and tell Service Broker how to route the message.

The first step in routing is to create a Service Broker endpoint on each instance of SQL Server involved in the route. In this case we have only one instance, so a single endpoint will do. The following CREATE ENDPOINT statement creates an endpoint on port 9998. Since the SQL Server service account always has access to its own service, we’ll use Windows authentication. In your actual environments you can choose either Windows authentication or use of a certificate; see Books Online for more information. Finally, again for simplicity, we’ll keep encryption disabled.

Once the endpoint has been created, a route can be put into place, using the TCP address of the endpoint: localhost:9998.

The route will be created for messages being sent to the service called BLOB_Service_Remote, and we’ll tell Service Broker which database the remote service is in, by using the Broker Instance GUID that is automatically created for each database. To get the GUID, query sys.databases:

At this point, assuming that you’re not an exceptionally fast reader, a minute has probably passed since the message send originally failed. If the following query returns no rows, wait a few more moments and try again. Now that the route is in place, the message should eventually show up.

We’ve certainly come a long way from Part 1 of this workbench! After reading this second part, you should now be equipped to handle most Service Broker challenges, including some troubleshooting and maintenance using the catalog views and Service Broker specific DDL. You should also understand some of the transactional internals as well as activation and routing behaviors.

The third and final part of this workbench series will apply what we’ve already covered, to create some interesting technical solutions that would not be nearly as easy to put together without Service Broker. Stay tuned for Part 3, coming to Simple Talk soon!

— Text prettified by the Simple-Talk prettifier

Downloads

Tags: , , , , , ,

  • 51992 views

  • Rate
    [Total: 1    Average: 5/5]
  • Anonymous

    Great Article
    Adam,

    I have a question while playing around with Simple_talk_ssb2 I have gotton something hung up and can no longer delete the database. It is driving me crazy. Do you have any suggestions?

  • svasudevan

    Great
    Adam Machanic, in this article has done a wonderful job making the audience understand the basics of advanced topics (as appropriate to the title).
    I read this and was able to implement conversation groups with so little trouble.
    Thank you so much.

  • DuncFair

    Threequel?
    Great stuff, but I want 3rds!

    Has part III been posted? Link please.

    Thanks!

    Dunc

  • DuncFair

    Threequel?
    Great stuff, but I want 3rds!

    Has part III been posted? Link please.

    Thanks!

    Dunc